Disabled.displayName=Disabled
Enabled.displayName=Enabled
MessageConditionKind.DEST_ADDR=Destination Address
MessageConditionKind.FROM=From
MessageConditionKind.REQUEST_URI=Request URI
MessageConditionKind.SOURCE_ADDR=Source Address
MessageConditionKind.TO=To
MethodConditionKind=METHOD
MethodConditionKind.INFO=INFO
MethodConditionKind.INVITE=INVITE
MethodConditionKind.MESSAGE=MESSAGE
MethodConditionKind.OPTIONS=OPTIONS
MethodConditionKind.PUBLISH=PUBLISH
MethodConditionKind.REFER=REFER
MethodConditionKind.REGISTER=REGISTER
MethodConditionKind.SUBSCRIBE=SUBSCRIBE
SipProxy.Component.properties.displayName=Custom properties
SipProxySettings.SIPAdvisorMethodName.displayName=SIP health check method name
SipProxySettings.defaultTCPChannelChain.displayName=Default TCP channel chain
SipProxySettings.defaultTLSChannelChain.displayName=Default TLS channel chain
SipProxySettings.defaultUDPChannelChain.displayName=Default UDP channel chain
SipProxySettings.enableMaxThroughputFactor.displayName=Enable proxy managed overload protection
SipProxySettings.enableNumAdvisorRequestsBeforeFailure.displayName=Tolerate a specified number of negative health checks before indicating failure
SipProxySettings.enableSIPNetworkOutageDetection.displayName=Enable SIP network outage detection
SipProxySettings.keepAliveFailures.displayName=Maximum keep alive failures
SipProxySettings.keepAliveInterval.displayName=Keep alive interval
SipProxySettings.loadBalancerMembers.displayName=Load balancer members
SipProxySettings.maxThroughputFactor.displayName=Max throughput factor 
SipProxySettings.megabytes.unit=MB
SipProxySettings.ms.unit=milliseconds
SipProxySettings.numAdvisorRequestsBeforeFailure.displayName=Maximum negative health checks
SipProxySettings.outboundConnection.displayName=Container facing network interface
SipProxySettings.overloadResponseCode.displayName=Overload response code
SipProxySettings.overloadResponseReasonPhrase.displayName=Overload response reason phrase
SipProxySettings.percent.unit=%
SipProxySettings.primarySIPAdvisorIPAddress.displayName=IP address 1
SipProxySettings.retryAfterValue.displayName=Retry-After header value
SipProxySettings.secondarySIPAdvisorIPAddress.displayName=IP address 2
SipProxySettings.seconds.unit=seconds
SipProxySettings.section.advisorMessages.displayName=Load balancer health checking
SipProxySettings.section.overloadProtection.displayName=Overload protection
SipProxySettings.section.sipNetworkOutageDetection.displayName=SIP network outage detection
SipProxySettings.serverTCPInterface.displayName=TCP interface
SipProxySettings.serverTLSInterface.displayName=TLS interface
SipProxySettings.serverUDPInterface.displayName=UDP interface
SipProxySettings.serverUDPPort.displayName=UDP port
SipRoutingRuleCondition.confirmMessageCondition.summaryNew=New SIP message condition "{0}" will be created within the SIP routing rule.
SipRoutingRuleCondition.confirmMethodMessageCondition.summaryNew=New SIP method message condition "{0}" will be created within the SIP routing rule.
SipRoutingRuleCondition.createMessageCondition.error=A error occurred while creating a new SIP message condition.
SipRoutingRuleCondition.createMessageCondition.success=New SIP message condition "{0}" created successfully.
SipRoutingRuleCondition.createMethodMessageCondition.error=An error occurred while creating a new SIP method message condition.
SipRoutingRuleCondition.createMethodMessageCondition.success=New SIP method message condition "{0}" created successfully.
SipRoutingRuleCondition.headerKey.displayName=Header name:
SipRoutingRuleCondition.headerMessageCondition.displayName=SIP Header Message Condition
SipRoutingRuleCondition.headerMessageConditionType.displayName=Condition type: User defined header
SipRoutingRuleCondition.headerValue.displayName=Header value:
SipRoutingRuleCondition.new.step1=Select a SIP method message or message condition template
SipRoutingRuleCondition.new.step2=Configure a SIP method message or message condition
SipRoutingRuleCondition.new.step3=Confirm a method message or message condition creation
SipRoutingRuleCondition.redundant.condition.error=No more than one method condition is allowed on any single routing rule.  No more than one To, From, Request URI, Source and Destination Address is allowed on any single routing rule.  Conditions are AND'd together and rules are Or'd together.  Therefore, a single rule with multiple method conditions or multiple To fields would never find a match.
addprops.category.label.sipproxy=SIP Proxy Server Settings
button.disable=Disable
button.enable=Enable
error.duplicate.domainname=A domain with name {0} already exists. You must use a unique domain name.


SIPMessageCondition.selectTemplate.description=A new SIP message condition will be created within the current SIP routing rule.
SIPMessageCondition.selectTemplate.displayName=SIP method message or message condition template
SIPMessageCondition.selectTemplate.title.displayName=Select a SIP message condition template from which a new SIP message condition is created within the current SIP routing rule.
SIPModuleProxyProperties.description=The proxy server configuration settings for this SIP module.
SIPModuleProxyProperties.displayName=SIP module proxy configuration
SipExternalDomain.distinguishedName.description=Specifies the name that is associated with the external domain. This value is used when SSL client authentication is enabled to limit connections from an external domain.
SipExternalDomain.distinguishedName.displayName=Distinguished name
SipExternalDomain.domainName.description=Specifies the SIP domain that is mapped to the protocol, host name, and port number. These values are specified in the related fields on this panel. 
SipExternalDomain.domainName.displayName=Domain
SipExternalDomain.host.description=Specifies the host name for making the SIP connection that is associated with the domain.
SipExternalDomain.host.displayName=Host name
SipExternalDomain.panel.description=External domain
SipExternalDomain.panel.displayName=External domain
SipExternalDomain.port.description=Specifies the port number for making the SIP connection that is associated with the domain.
SipExternalDomain.port.displayName=Port
SipExternalDomain.protocol.TCP.displayName=TCP
SipExternalDomain.protocol.TLS.displayName=TLS
SipExternalDomain.protocol.UDP.displayName=UDP
SipExternalDomain.protocol.description=Specifies the protocol for making the SIP connection that is associated with the domain.
SipExternalDomain.protocol.displayName=Protocol
SipExternalDomains.link.description=Through external domains, the SIP proxy can locate SIP services that are not known to domain name service (DNS).
SipExternalDomains.link.displayName=External domains
SipExternalDomains.panel.description=Through external domains, the SIP proxy can locate SIP services that are not known to domain name service (DNS).
SipExternalDomains.panel.displayName=External domains
SipProxy.channelfw.transports.description=The inbound transports are associated with the SIP proxy server.
SipProxy.channelfw.transports.displayName=SIP proxy server transports
SipProxySettings.NoClusterName.displayName=None
SipProxySettings.SIPAdvisorIPAddress.description=Specifies the IP addresses of the Load Balancers that source the SIP health checks.  These IP address 1 and IP address 2 are accessed in round robin order.
SipProxySettings.SIPAdvisorMethodName.description=This string value represents the method name that the Load Balancer is sending to the SIP Proxy, which is used for health checks.
SipProxySettings.SSLSprayer.host.description=Specifies the host name of the external IP sprayer device that accepts the SSL protocol.
SipProxySettings.SSLSprayer.host.displayName=SSL host
SipProxySettings.SSLSprayer.port.description=Specifies the port number of the external IP sprayer device that accepts the SSL protocol.
SipProxySettings.SSLSprayer.port.displayName=SSL port
SipProxySettings.TCPSprayer.host.description=Specifies the host name of the external IP sprayer device that accepts the TCP protocol.
SipProxySettings.TCPSprayer.host.displayName=TCP host
SipProxySettings.TCPSprayer.port.description=Specifies the port number of the external IP sprayer device that accepts the TCP protocol.
SipProxySettings.TCPSprayer.port.displayName=TCP port
SipProxySettings.UDPSprayer.host.description=Specifies the host name of the external IP sprayer device that accepts the UDP protocol.
SipProxySettings.UDPSprayer.host.displayName=UDP host
SipProxySettings.UDPSprayer.port.description=Specifies the port number of the external IP sprayer device that accepts the UDP protocol.
SipProxySettings.UDPSprayer.port.displayName=UDP port
SipProxySettings.advisorMessages.description=Advisor messages
SipProxySettings.defaultClusterName.description=Specifies the default cluster name.
SipProxySettings.defaultClusterName.displayName=Default cluster
SipProxySettings.defaultTCPChannelChain.description=Provides the ability for an application to choose which TCP interface is used to send outgoing messages.
SipProxySettings.defaultTLSChannelChain.description=Provides the ability for an application to choose which TLS interface is used to send outgoing messages.
SipProxySettings.defaultUDPChannelChain.description=Provides the ability for an application to choose which UDP interface is used to send outgoing messages.
SipProxySettings.enable.SSLSprayer.description=Enables and disables SIP outbound request rewriting so that the SIP proxy can operate behind an IP sprayer.
SipProxySettings.enable.SSLSprayer.displayName=Enable SSL sprayer
SipProxySettings.enable.TCPSprayer.description=Enables and disables SIP outbound request rewriting so that the SIP proxy can operate behind an IP sprayer.
SipProxySettings.enable.TCPSprayer.displayName=Enable TCP sprayer
SipProxySettings.enable.UDPSprayer.description=Enables and disables SIP outbound request rewriting so that the SIP proxy can operate behind an IP sprayer.
SipProxySettings.enable.UDPSprayer.displayName=Enable UDP sprayer
SipProxySettings.enableLogging.description=Enables and disables access logging.
SipProxySettings.enableLogging.displayName=Enable access logging
SipProxySettings.enableSSL.description=Enables and disables the outbound SSL transport.
SipProxySettings.enableSSL.displayName=Enable SSL
SipProxySettings.excludeList.description=URIs listed in this field will be rejected by the proxy. Range: A list of valid SIP URIs that are delimited by a new line character.
SipProxySettings.excludeList.displayName=Exclude URI group
SipProxySettings.inactivityTimeout.description=Specifies the inactivity timeout value is needed to ensure that connections do not stay open indefinitely.
SipProxySettings.inactivityTimeout.displayName=Inactivity timeout
SipProxySettings.inboundSSLAlias.description=Specifies the SSL alias that is configured to accept connections from clients.
SipProxySettings.inboundSSLAlias.displayName=SSL alias to use for accepting connections
SipProxySettings.keepAliveFailures.description=Specifies the number of KEEPALIVE requests that are sent without getting a response before considering this server down.
SipProxySettings.keepAliveInterval.description=Specifies the interval, in milliseconds, at which the KEEPALIVE packets are sent to the SIP containers.
SipProxySettings.link.description=These settings describe the advanced attributes and policies that define the behavior of the SIP proxy server.
SipProxySettings.link.displayName=SIP proxy settings
SipProxySettings.maxThroughputFactor.description=This value turns on overload protection at the proxy and is a percentage of the Maximum Messages per Averaging Period for the SIP Container.
SipProxySettings.numAdvisorRequestsBeforeFailure.description=The number of SIP advisor requests to miss before this SIP proxy informs the other SIP proxies that it is no longer processing data.
SipProxySettings.outboundConnection.description=Configure the container facing network interfaces
SipProxySettings.outtboundSSLAlias.description=Refers to the SSL repertoire for the outbound SSL transport.
SipProxySettings.outtboundSSLAlias.displayName=Outbound SSL alias
SipProxySettings.overloadResponseCode.description=When the proxy detects an overload condition, it will respond to the request with a the overload response code value if it is set.
SipProxySettings.overloadResponseReasonPhrase.description=When the proxy detects an overload condition it will respond with the overload response reason phrase, if it is set.
SipProxySettings.panel.description=These settings describe the advanced attributes and policies that define the behavior of the SIP proxy server.
SipProxySettings.panel.displayName=SIP proxy settings
SipProxySettings.proxyAccessLog.description=Specifies the location of the SIP proxy access log.
SipProxySettings.proxyAccessLog.displayName=Proxy access log
SipProxySettings.proxyAccessLogMaxSize.description=Specifies the maximum size, in megabytes, for the access log before it rolls over to a new file.
SipProxySettings.proxyAccessLogMaxSize.displayName=Access log maximum size
SipProxySettings.retryAfterValue.description=Modifies the Retry-After header value that gets returned if SIP containers are overloaded or if the SIP proxy cannot locate available servers to which it can route the request. 
SipProxySettings.section.Exclusion=Exclusions:
SipProxySettings.section.Exclusion.description=Configures the properties that describe the requests to be rejected by the proxy server. Disable multiple methods by entering one method name per line.
SipProxySettings.section.IPSprayer=IP sprayer configurations:
SipProxySettings.section.IPSprayer.description=Configures the SIP infrastructure to use IP sprayer.
SipProxySettings.section.Logging=Logging
SipProxySettings.section.Logging.description=Configure the location of the log that is generated by the SIP proxy server.
SipProxySettings.section.Security=Security:
SipProxySettings.section.Security.description=Configuration attributes that help secure the proxy server
SipProxySettings.section.outboundTransport=Outbound transport:
SipProxySettings.section.outboundTransport.description=The properties influence the characteristics of the connection to the origin server.
SipProxySettings.section.overloadProtection.description=Overload Protection
SipProxySettings.section.sipNetworkOutageDetection.description=SIP network outage detection
SipProxySettings.serverTCPInterface.description=Configures the specific network interface for all TCP data that is goes to and from the SIP container or containers.
SipProxySettings.serverTLSInterface.description=Configures the specific network interface for all TLS data that is goes to and from the SIP container or containers.
SipProxySettings.serverUDPInterface.description=Configures the specific network interface for all UDP data that is goes to and from the SIP container or container.
SipProxySettings.serverUDPPort.description=Configures the UDP port that is used for SIP container communications. This setting can be useful when the firewall is between the SIP proxy and the SIP container.
SipProxySettings.trustedIntermediaryAddresses.description=Configure the host name or IP address of the security proxies to trust.  Enter one IP address or host name per line.
SipProxySettings.trustedIntermediaryAddresses.displayName=Trusted security proxies
SipRoutingRule.cluster.description=The name of the cluster to which the rule directs SIP requests.
SipRoutingRule.cluster.displayName=Cluster
SipRoutingRule.enabled.description=Allows a rule to be removed from consideration without requiring that it is deleted.
SipRoutingRule.enabled.displayName=Enabled
SipRoutingRule.panel.description=A routing rule maps SIP requests that match the conditions to the selected cluster.
SipRoutingRule.panel.displayName=Routing rule
SipRoutingRule.section.conditions.description=A concatenated list of conditions that are associated with the rule.
SipRoutingRule.section.conditions.displayName=Conditions
SipRoutingRuleCondition.ConditionValue.displayName=Condition value:
SipRoutingRuleCondition.MessageCondition.description=Five condition types: To, From, Request URI, Source Address and Destination Address. The To, From and Request URI types are all derived from the SIP message header. The Source and Destination Address types are derived from the transport layer.
SipRoutingRuleCondition.MessageCondition.displayName=SIP message condition
SipRoutingRuleCondition.SelectConditionType.displayName=Type:
SipRoutingRuleCondition.create.new.description=Create a new SIP method message or message condition
SipRoutingRuleCondition.create.new.title=Create a New SIP Method Message or Message Condition
SipRoutingRuleCondition.headerKey.description=This value is the SIP header name, which is used to route to the correct cluster. This value typically represents a non-standard header name.
SipRoutingRuleCondition.headerMessageCondition.description=SIP Header Message Condition
SipRoutingRuleCondition.headerMessageConditionType.description=Allows a cluster routing rule to be defined to route to a specific cluster based off of a defined header value. The format is Cluster1:HeaderKey1:HeaderValue1. 
SipRoutingRuleCondition.headerValue.description=This value is the value portion of the header and needs to be an exact match.
SipRoutingRuleCondition.messageCondition.confirm.title1.displayName=A summary of the selections follows. Click Finish to complete the creation process for the SIP message condition in the current SIP routing rule.
SipRoutingRuleCondition.messageCondition.confirm.title2.displayName=To change any of the settings, click Previous to review the SIP message condition.
SipRoutingRuleCondition.messageCondition.enterValue.description=
SipRoutingRuleCondition.messageCondition.enterValue.displayName=Enter a message value.
SipRoutingRuleCondition.messageCondition.selectTypeSetValue.title.displayName=Select a message type and enter a message value to create a new SIP message condition within the current SIP routing rule.
SipRoutingRuleCondition.messageCondition.selectTypes.description=
SipRoutingRuleCondition.messageCondition.selectTypes.displayName=Select a message type.
SipRoutingRuleCondition.methodMessageCondition.description=Contains the predefined method types that are used when the condition type is the Method type. Range: INVITE, REGISTER, REFER, SUBSCRIBE, UNSUBSCRIBE, PUBLISH, MESSAGE, OPTIONS, INFO.
SipRoutingRuleCondition.methodMessageCondition.displayName=SIP Method Message Condition
SipRoutingRuleCondition.methodMessageCondition.selectMethod.title.displayName=Select a message method from which new SIP method message conditions are created within the current SIP routing rule.
SipRoutingRuleCondition.methodMessageCondition.selectValues.description=
SipRoutingRuleCondition.methodMessageCondition.selectValues.displayName=Select a method type.
SipRoutingRuleCondition.methodMessageConditionType.displayName=Condition type: Method 
SipRoutingRuleCondition.methodmessageCondition.confirm.title1.displayName=A summary of the selections follows. Click Finish to complete the creation process for the SIP method message condition in the current SIP routing rule.
SipRoutingRuleCondition.methodmessageCondition.confirm.title2.displayName=To change any of the settings, click Previous to review the message condition for the SIP method.
SipRoutingRuleCondition.otherMessageConditionType.displayName=Condition type: Defaults
SipRoutingRuleCondition.panel.description=A condition applies to a specific aspect of a SIP message.
SipRoutingRuleCondition.panel.displayName=Condition
SipRoutingRuleCondition.section.displayName=Method condition
SipRoutingRuleConditions.link.description=Conditions determine which SIP messages match the rule.
SipRoutingRuleConditions.link.displayName=Conditions
SipRoutingRuleConditions.panel.description=Conditions determine which SIP messages match the rule. Multiple conditions are combined using a logical AND.
SipRoutingRuleConditions.panel.displayName=Conditions
SipRoutingRuleConditions.type.description=Specifies which aspect of a SIP message the condition applies to.
SipRoutingRuleConditions.type.displayName=Type
SipRoutingRuleConditions.value.description=Specifies the value that is compared to the aspect of the SIP message, which is indicated by the type.
SipRoutingRuleConditions.value.displayName=Value
SipRoutingRuleOrder.Select=Select
SipRoutingRuleOrder.cluster.description=Specifies the name of the cluster to which the rule directs SIP requests.
SipRoutingRuleOrder.cluster.displayName=Cluster
SipRoutingRuleOrder.condition.description=Displays a concatenated list of conditions that are associated with the rule.
SipRoutingRuleOrder.condition.displayName=Conditions
SipRoutingRuleOrder.enabled.description=Specifies whether the rule is enabled and considered for evaluation.
SipRoutingRuleOrder.enabled.displayName=Enabled
SipRoutingRuleOrder.panel.description=Routing rules provide a method to direct SIP traffic to specific clusters.
SipRoutingRuleOrder.panel.displayName=SIP routing rules order
SipRoutingRuleOrder.panel.field.description=Specifies the SIP routing rule order in which to direct SIP traffic to specific clusters.
SipRoutingRuleOrder.panel.field.displayName=SIP routing rules order
SipRoutingRules.cluster.displayName=Cluster
SipRoutingRules.condition.displayName=Conditions
SipRoutingRules.enabled.displayName=Enabled
SipRoutingRules.link.description=The routing rules provide a method to direct SIP traffic to specific clusters.
SipRoutingRules.link.displayName=Routing rules
SipRoutingRules.order.displayName=Order
SipRoutingRules.panel.description=The routing rules provide a method to direct SIP traffic to specific clusters.
SipRoutingRules.panel.displayName=Routing rules
