LoadBalanceKind.RANDOM=Random
LoadBalanceKind.ROUND_ROBIN=Round Robin
PluginPriorityKind.HIGH=High
PluginPriorityKind.LOW=Low
PluginPriorityKind.MEDIUM=Medium
PortPreferenceKind.HOSTHEADER=Host header
PortPreferenceKind.WEBSERVERPORT=Web server port
RoleKind.Backup=Backup
RoleKind.Primary=Primary
View.Access=View
View.Error=View
WebServer.Platform=Platform
WebServer.Platform.AIX=AIX
WebServer.Platform.HP=HP-UX
WebServer.Platform.LINUX=Linux
WebServer.Platform.OS400=OS/400
WebServer.Platform.SOLARIS=Solaris
WebServer.Platform.WINDOWS=Windows
WebServer.Platform.ZOS=z/OS
WebServer.Platform.description=Specify a platform that corresponds to the host machine operating system of a Web server.
WebServer.clusterPluginProps.clusterAddress=Cluster address
WebServer.clusterPluginProps.clusterAddressName=Cluster address name
WebServer.clusterPluginProps.connectTimeout=Connection timeout
WebServer.clusterPluginProps.connectTimeout.seconds=seconds
WebServer.clusterPluginProps.connections=connections
WebServer.clusterPluginProps.displayName=Web server plug-in cluster properties
WebServer.clusterPluginProps.enableClusterAddress=Use cluster address
WebServer.clusterPluginProps.enableHTTP=Specify HTTP transport
WebServer.clusterPluginProps.enableHTTPS=Specify HTTPS transport
WebServer.clusterPluginProps.extendedHandshake=Use extended handshake to check whether Application Server is running
WebServer.clusterPluginProps.getDWLMTable=Fetch partition table (getDWLMTable)
WebServer.clusterPluginProps.host=Host
WebServer.clusterPluginProps.keyring=Keyring
WebServer.clusterPluginProps.maxConnections=Maximum number of connections that can be handled by the Application server
WebServer.clusterPluginProps.maxConnectionsLabel=Maximum number of connections
WebServer.clusterPluginProps.port=Port
WebServer.clusterPluginProps.serverIOTimeout=Read/Write timeout
WebServer.clusterPluginProps.serverIOTimeout.seconds=seconds
WebServer.clusterPluginProps.serverIOTimeoutRetry=Server read/write timeout retry count
WebServer.clusterPluginProps.serverIOTimeoutRetry.retries=retries
WebServer.clusterPluginProps.setLimit=Use maximum number of connections
WebServer.clusterPluginProps.stashfile=Stashfile
WebServer.clusterPluginProps.waitForContinue=Send the header "100 Continue" before sending the request content
WebServer.configFile.displayName=Configuration file
WebServer.configFile.retrieveLinesExample=Retrieve lines (for example, 250-600)
WebServer.configFile.retrievedLines=Retrieved lines:
WebServer.configFileLink.displayName=Configuration File
WebServer.detail.configFile=Configuration file name
WebServer.detail.hostname=Host name
WebServer.detail.installPath=Web server installation location
WebServer.detail.instanceName=Web server Instance Name
WebServer.detail.logFile=Log file name
WebServer.detail.name=Web server name
WebServer.detail.platformOS=Platform Type
WebServer.detail.port=Port
WebServer.detail.protocol=Use SSL
WebServer.detail.serviceName=Service name
WebServer.detail.type=Type
WebServer.displayName=Web servers
WebServer.general.properties=General Properties
WebServer.globalsettings.certificatelabel=Key store certificate alias
WebServer.globalsettings.certificatelabel.description=Specifies the certificate to use in the key store for global security.
WebServer.globalsettings.clientauth=Client authentication
WebServer.globalsettings.clientauth.description=Client authentication
WebServer.globalsettings.description=Use this page to view or modify global directives for IBM HTTP Server.
WebServer.globalsettings.displayName=Global Directives
WebServer.globalsettings.documentroot=Document root
WebServer.globalsettings.documentroot.description=Specifies the main directory where the Web server will serve web pages.
WebServer.globalsettings.keyfiledirectory=Target key store directory and file name
WebServer.globalsettings.keyfiledirectory.description=Specifies the directory and file name for the key store on target Web server machine.  This will also be the entry in the configuration file for IBM HTTP Server <KeyFile> directive.
WebServer.globalsettings.keyfilename=Key store name
WebServer.globalsettings.keyfilename.description=Specifies the name of the key store in the WebSphere repository.  This key store exists in the WebSphere repository and can be managed through the console.  Only one key store can be defined per Web server instance.  Use certificate alias to select a specific certificate for use in the global scope or in a virtual host.  To create a key store file, run the virtual host wizard and select security enabled virtual host.
WebServer.globalsettings.link.description=Use this page to view or modify global settings for IBM HTTP Server.
WebServer.globalsettings.link.displayName=Global Directives
WebServer.globalsettings.listen=Listen ports
WebServer.globalsettings.listen.description=Specifies the ports the Web server will listen on.  This list includes ports defined specifically for virtual hosts.  Enter one listen statement per line.
WebServer.globalsettings.seconds=seconds
WebServer.globalsettings.secureactivation=Global scope security activation
WebServer.globalsettings.secureactivation.description=Global scope security activation
WebServer.globalsettings.securesettings=Global security directives
WebServer.globalsettings.securesettings.description=Global security settings
WebServer.globalsettings.securityv2timeout=SSL Version 2 timeout
WebServer.globalsettings.securityv2timeout.description=Specifies the timeout for SSL version 2 IDs in seconds in range from 1 to 100 seconds.
WebServer.globalsettings.securityv3timeout=SSL Version 3 timeout
WebServer.globalsettings.securityv3timeout.description=Specifies the timeout for SSL version 3 IDs in range from 1 to 86400 seconds.
WebServer.globalsettings.servername=Server name
WebServer.globalsettings.servername.description=Specifies the host name and port the Web server uses to identify itself.
WebServer.label=Web server
WebServer.logFile.access=Access log file name
WebServer.logFile.displayName=Log file
WebServer.logFile.error=Error log file name
WebServer.logFile.retrieveLinesExample=Retrieve lines (eg. 250-600)
WebServer.logFile.retrievedLines=Retrieved lines:
WebServer.logFileLink.displayName=Log file
WebServer.name.displayName=Name
WebServer.node.noVersion=Not applicable
WebServer.plugin.link.caching.displayName=Caching
WebServer.plugin.link.customprops.displayName=Custom Properties
WebServer.plugin.link.optimization.displayName=Request and Response
WebServer.plugin.link.servercluster.displayName=Request Routing
WebServer.pluginCaching.displayName=Caching
WebServer.pluginCaching.enableESI=Enable Edge Side Include (ESI) processing to cache the responses
WebServer.pluginCaching.enableInvalidator=Enable invalidation monitor to receive notifications
WebServer.pluginCaching.kbyte=KB
WebServer.pluginCaching.maxCacheSize=Maximum cache size
WebServer.pluginCluster.cloneSeparator=Clone separator change
WebServer.pluginCluster.displayName=Request routing
WebServer.pluginCluster.kbyte=KBytes
WebServer.pluginCluster.loadBalancing=Load balancing option
WebServer.pluginCluster.maxRequestSizeLabel=Maximum size of request content
WebServer.pluginCluster.noLimit=No Limit
WebServer.pluginCluster.postBufferSize=Maximum buffer size used when reading the HTTP request content
WebServer.pluginCluster.removeHeaders=Remove special headers
WebServer.pluginCluster.retryInterval=Retry interval
WebServer.pluginCluster.seconds=seconds
WebServer.pluginCluster.setLimit=Set Limit
WebServer.pluginOptimization.ASNagle=Enable the Nagle Algorithm for connections to the Application Server
WebServer.pluginOptimization.IISNagle=Enable the Nagle Algorithm for the Microsoft IIS Web server
WebServer.pluginOptimization.IISPriority=Priority used by the Microsoft IIS Web server when loading the plug-in
WebServer.pluginOptimization.acceptContent=Accept content for all requests
WebServer.pluginOptimization.chunkResponse=Chunk HTTP response to the client
WebServer.pluginOptimization.displayName=Request and response
WebServer.pluginOptimization.kbyte=KB
WebServer.pluginOptimization.logical=logical
WebServer.pluginOptimization.logicalPort=Logically using the port number from the host header
WebServer.pluginOptimization.maxChunkSize=Maximum chunk size used when reading the HTTP response body
WebServer.pluginOptimization.physical=physical
WebServer.pluginOptimization.physicalPort=Physically using the port specified in the request
WebServer.pluginOptimization.portPreference=Application server port preference
WebServer.pluginOptimization.vhMatchingLabel=Virtual host matching:
WebServer.pluginProperties.appMap=Application mapping to the Web server
WebServer.pluginProperties.appMap.ALL=All
WebServer.pluginProperties.appMap.NONE=None
WebServer.pluginProperties.appMap.description=Web server application mapping.
WebServer.pluginProperties.autoGen=Automatically generate the plug-in configuration file
WebServer.pluginProperties.autoProp=Automatically propagate plug-in configuration file
WebServer.pluginProperties.configFile=Plug-in configuration file
WebServer.pluginProperties.configFileName=Plug-in configuration file name
WebServer.pluginProperties.displayName=Plug-in properties
WebServer.pluginProperties.filename.error=ERROR: Only enter a file name in this field. The {0} directory is used to locate the file or create a new file.
WebServer.pluginProperties.ignoreDNS=Ignore DNS failures during Web server startup
WebServer.pluginProperties.installPath=Plug-in installation location
WebServer.pluginProperties.logFile=Plug-in log file
WebServer.pluginProperties.logFileName=Log file name
WebServer.pluginProperties.logLevel=Log level
WebServer.pluginProperties.pluginLogging=Plug-in logging:
WebServer.pluginProperties.refreshInterval=Refresh configuration interval
WebServer.pluginProperties.repository.files=Repository copy of Web server plug-in files:
WebServer.pluginProperties.repository.keyRingFileName=Plug-in key store file name
WebServer.pluginProperties.runtimeLogFileName=Plug-in log file name
WebServer.pluginProperties.seconds=seconds
WebServer.pluginProperties.webserver.configFileName=Plug-in configuration directory and file name
WebServer.pluginProperties.webserver.files=Web server copy of Web server plug-in files:
WebServer.pluginProperties.webserver.keyRingFileName=Plug-in key store directory and file name
WebServer.pluginService.displayName=Web server plug-in configuration service
WebServer.pluginService.enable.displayName=Enable automated Web server configuration processing
WebServer.property.description.displayName=Description
WebServer.property.displayName=Property
WebServer.property.link.displayName=Custom properties
WebServer.property.name.displayName=Name
WebServer.property.value.displayName=Value
WebServer.remote.adminhostname=Host name
WebServer.remote.displayName=Remote Web server management
WebServer.remote.password=Password
WebServer.remote.port=Port
WebServer.remote.protocol=Use SSL
WebServer.remote.userid=Username
WebServer.remoteManagement.displayName=Remote Web server management
WebServer.remoteManagement.state=State
WebServer.runtime.cellName.displayName=Cell Name
WebServer.runtime.nodeName.displayName=Node Name
WebServer.runtime.pid.displayName=Process Id
WebServer.runtime.state.displayName=State
WebServer.serverPluginProps.connectTimeout=Connection timeout
WebServer.serverPluginProps.connectTimeout.seconds=seconds
WebServer.serverPluginProps.connections=connections
WebServer.serverPluginProps.displayName=Web server plug-in properties
WebServer.serverPluginProps.extendedHandshake=Use extended handshake to check whether Application Server is running
WebServer.serverPluginProps.maxConnections=Maximum number of connections that can be handled by the Application server
WebServer.serverPluginProps.maxConnectionsLabel=Maximum number of connections
WebServer.serverPluginProps.serverIOTimeout=Read/Write timeout
WebServer.serverPluginProps.serverIOTimeout.seconds=seconds
WebServer.serverPluginProps.serverRole=Server Role
WebServer.serverPluginProps.setLimit=Use maximum number of connections
WebServer.serverPluginProps.setRWTimeout=Use read/write timeout
WebServer.serverPluginProps.setTimeout=Use connection timeout
WebServer.serverPluginProps.waitForContinue=Send the header "100 Continue" before sending the request content
WebServer.status.displayName=Status
WebServer.transfer.error=A problem was encountered transferring the designated file.  Make sure the file exists and has correct access permissions.
WebServer.type.displayName=Web server Type
WebServer.typechanged.description=Use this page to fill in required properties when changing the Web Server type to IHS.   These fields can be adjusted later on the Web Server detail page.
WebServer.typechanged.displayName=Web Server type change
WebServer.vhost.certificatelabel=Key store certificate alias
WebServer.vhost.certificatelabel.description=Specifies the certificate to use in the key store for this virtual host.
WebServer.vhost.clientauth.description=Client authentication
WebServer.vhost.clientauth.displayName=Client authentication
WebServer.vhost.description=Use this page to create a Web server virtual host.  A virtual host allows multiple web sites to run under one Web server instance.  Virtual hosts can be named-based or IP-based.   A name-based virtual hosts allows multiple websites with different host names to run on one IP address.   An IP-based website uses different IP addresses to run multiple web sites.  Security can be enabled on an IP-based virtual host but cannot be enabled on a name-based virtual host.
WebServer.vhost.displayName=Web server Virtual Host
WebServer.vhost.displayinfo.displayName=IP Address:Port
WebServer.vhost.documentroot.description=Specifies the directory where the specified virtual host will serve web pages.
WebServer.vhost.documentroot.displayName=Document root
WebServer.vhost.ipaddress.description=Specifies the full IP address that a client uses to access the Web server.  Use 0.0.0.0 for the default host. To listen on all IP interfaces, use * in this field.  A full host name can also be used but not recommended.  IP Version 6 IP addresses can also be entered in bracket format example: [2001:db8:d0ff:a00:20ff:fea7:ccea:236b]
WebServer.vhost.ipaddress.displayName=IP address
WebServer.vhost.ipallvalidate=A port must be defined if you specify * for the IP address.
WebServer.vhost.keyfile=Key store
WebServer.vhost.keyfile.description=Key store
WebServer.vhost.keyfiledirectory=Target key store directory
WebServer.vhost.keyfiledirectory.description=Specifies the directory and file name for the key store on target Web server machine.  This will also be the entry in the configuration file for IBM HTTP Server Keyfile directive.
WebServer.vhost.keyfilesetinglobal=Keyfile is set in global scope.
WebServer.vhost.keylabel=Key store settings
WebServer.vhost.keylabel.description=Key store settings
WebServer.vhost.link.description=Web server virtual hosts description.
WebServer.vhost.link.displayName=Web server virtual hosts
WebServer.vhost.namebasedip=Name based virtual host
WebServer.vhost.namebasedip.description=Check this box if you wish this virtual host to be a name based virtual host.  A NameVirtualHost directive will be added if this is checked.
WebServer.vhost.no.keystorename=Key store file does not exist in the WebSphere repository. You may have a <KeyFile> directive defined in IBM HTTP Server configuration file but you can not manage the key store data through the console unless a key store file is created in WebSphere repository. To create a key store file, run the virtual host wizard and select security enabled virtual host.
WebServer.vhost.port.description=Specifies the port for the Web server to accept incoming requests.  Valid port values are between 1 and 65535.
WebServer.vhost.port.displayName=Port
WebServer.vhost.secureactivation=Virtual host security activation
WebServer.vhost.secureactivation.description=Virtual host security activation
WebServer.vhost.securityenabled=Security enabled
WebServer.vhost.securityenabled.description=Specifies whether to enable security for this virtual host.
WebServer.vhost.securityenabled.displayName=Security Enabled
WebServer.vhost.servername.description=Specifies the host name for the virtual host.
WebServer.vhost.servername.displayName=Server name
WebServer.vhosts.link.description=Use this page to view or modify virtual hosts settings for IBM HTTP Server.
WebServer.vhosts.link.displayName=Web Server Virtual Hosts
WebServerTemplate.description=Description
WebServerTemplate.name=Template Name
WebServerTemplate.type=Type
WebserverShortTypeKind.IHS=IHS
WebserverTypeKind.APACHE=APACHE
WebserverTypeKind.APACHE.displayName=Apache HTTP Server
WebserverTypeKind.DOMINO=DOMINO
WebserverTypeKind.DOMINO.displayName=Domino Web IBM HTTP Server
WebserverTypeKind.HTTPSERVER_ZOS=HTTPSERVER_ZOS
WebserverTypeKind.HTTPSERVER_ZOS.displayName=HTTP Server for zOS
WebserverTypeKind.IHS=IBM HTTP Server
WebserverTypeKind.IHS.displayName=IBM HTTP Server
WebserverTypeKind.IIS=IIS
WebserverTypeKind.IIS.displayName=Microsoft Internet Information Services (IIS)
WebserverTypeKind.SUNJAVASYSTEM=SUNJAVASYSTEM
WebserverTypeKind.SUNJAVASYSTEM.displayName=Sun Java System Web Server
button.edit=Edit
button.genplugin=Generate Plug-in
button.managekeyfile=Manage keys and certificates
button.propagatekeyfile=Copy to Web server key store directory
button.propplugin=Propagate Plug-in
button.refresh=Refresh
button.view=View
could.not.start.webserver=Web server {0} could not be started.
could.not.start.webserver.service=Windows Service name {0} on {1} Web server could not be started.
could.not.stop.webserver=An error occurred while stopping Web server {0}. Check the error logs.
could.not.stop.webserver.service=Windows Service name {0} on {1} Web server could not be stopped.
distmanagement.webserver.create.new=Create new Web server definition
nav.view.WebServer=Web servers
plugin.loglevel.debug=Debug
plugin.loglevel.detail=Detail
plugin.loglevel.error=Error
plugin.loglevel.stats=Stats
plugin.loglevel.trace=Trace
plugin.loglevel.warn=Warn
use.secure.protocol=Use SSL
use.secure.protocol.desc=Use the HTTPS protocol to communicate with the Web server. The default is HTTP.
web.button.edit=Edit
web.label.description=Description
web.label.name=Name
webserver.IHSadmin.auth.failure=Authentication failure on access to the IBM HTTP Administration server on node {0}. Check Remote Administration Server Username and Password Properties.
webserver.IHSadmin.no.connection=Could not make a connection to the IBM HTTP Administration server on node {0}.
webserver.IHSadmin.no.user=The Remote Administration Server property Username or Password used for Authentication to the IBM HTTP Administration server is blank.
webserver.admin.config.error=Could not execute request. Error processing Mbean.
webserver.admin.no.connection=Could not make a connection to the node agent or IBM HTTP Server administration server on node {0}.
webserver.admin.not.active=The node agent or IBM HTTP Server administration server on node {0} is not active.
webserver.adminProps.confirmPassword=Confirm password
webserver.adminProps.confirmPassword.description=Re-enter the administration password for verification.
webserver.adminProps.confirmPassword.notmatched=The administration password does not match the value in the confirm password field.
webserver.adminProps.msg1=Enter the IBM Administration Server properties.
webserver.adminProps.msg2=Host name
webserver.adminProps.msg3=The host name for the administration server running with the Web server. This is typically the same host name as the Web server.
webserver.adminProps.msg4=Administration Server Port
webserver.adminProps.msg5=The administration server port.
webserver.adminProps.msg6=Username
webserver.adminProps.msg7=The administration user ID to use for administration authorization. This is typically set up using the htpasswd script on the Web server.
webserver.adminProps.msg8=Password
webserver.adminProps.msg9=The administration password to use with the Username. This is typically set up using the htpasswd script on the Web server.
webserver.already.started={0} is already started.
webserver.config.admin.no.connection=Could not make a connection to the node agent or IBM HTTP Server administration server on node {0}.  The latest IBM HTTP Server configuration file must be obtained before updates can be completed.
webserver.config.transfer.error=A problem was encountered transferring the IBM HTTP Server configuration file.  Make sure the file exists and has correct access permissions.  The latest IBM HTTP Server configuration file must be obtained before updates can be completed.
webserver.configuration.displayName=Configuration settings
webserver.confirmWebServer.msg1=The following is a summary of your selections. Click the Finish button to complete the Web server creation.
webserver.confirmWebServer.msg2=If there are settings you wish to change, click on Previous button to review the server settings.
webserver.confirmWebServer.msg3=The following actions will be completed
webserver.confirmWebServer.msg7=Possible issues caused by this action
webserver.confirmWebServer.msg8=Ensure that the node "{0}" has enough memory to support several processes. If it does not have enough memory, performance will be poor.
webserver.confirmWebServer.summary.hostname.local=New Web server entry "{0}" will be created on host name "{1}"\nPlatform Type "{2}"\nPlug-in installation root  "{3}".
webserver.confirmWebServer.summary.hostname.local.IHS=New Web server entry "{0}" will be created on host name "{1}"\nPlatform Type "{2}"\nWeb server installation root "{3}"\nPlug-in installation root "{4}".
webserver.confirmWebServer.summary.node.local=New Web server entry "{0}" will be created on node "{1}"\nPlatform Type "{2}"\nPlug-in installation root "{3}".
webserver.confirmWebServer.summary.node.local.IHS=New Web server entry "{0}" will be created on node "{1}"\nPlatform Type "{2}"\nWeb server installation root "{3}"\nPlug-in installation root "{4}".
webserver.confirmsslvhost.msg1=The following is a summary of your selections. Click the Finish button to complete the security enabled virtual host creation.
webserver.confirmsslvhost.msg2=If there are settings you wish to change, click on Previous button to review the virtual host settings.
webserver.createWebServer.msg1=A new Web server entry was created successfully.
webserver.deletevhost.page.msg1=Click the OK button below to delete the following virtual host(s). If you do not wish to delete the virtual hosts, click the CANCEL button to return to the prior  page.
webserver.enterProps.badWebType=Web server  type {0} not supported on platform {1}.
webserver.enterProps.invConfigFile=The Web server configuration file is not valid for this node's platform, "{0}". Web server configuration file must be fully qualified.
webserver.enterProps.invInstallRoot=The Web server installation location is not valid for this node's platform, "{0}". Web server installation location must be fully qualified.
webserver.enterProps.invPluginInstallRoot=The plug-in installation location is not valid for this node's platform, "{0}". Plug-in installation location must be fully qualified.
webserver.enterProps.msg1=Enter the Web server properties.
webserver.enterProps.msg10=Service name
webserver.enterProps.msg11=Enter Plugin property
webserver.enterProps.msg12=Web server Instance Name
webserver.enterProps.msg2=Type
webserver.enterProps.msg3=The Web server vendor type.
webserver.enterProps.msg4=Host name
webserver.enterProps.msg5=The Web server host name.
webserver.enterProps.msg6=Port
webserver.enterProps.msg7=The Web server port.
webserver.enterProps.msg8=Web server installation location
webserver.enterProps.msg9=The Web server installation location (Required for IBM HTTP Server ONLY).
webserver.globalsettings.configchanged=Changes have been made to the IBM HTTP Server configuration file.  A local copy has been saved to <br><li>{0}.</li><br>  You can: <br> <li><a href="/ibm/console/webServerPropagateConfig.do">Propagate configuration file </a> directly to the target Web server machine.
webserver.globalsettings.configchanged.discard=Current configuration settings have been discarded and Web server configuration file has been loaded from target machine.
webserver.globalsettings.configchanged.success=Configuration file has been successfully propagated to target machine.   Restart the Web server for changes to take effect.
webserver.globalsettings.configchanged2=Previous configuration changes have been detected and are currently loaded.  These changes have not been propagated to target Web server machine.  These previous changes were saved to <br><li>{0}.</li><br>You can: <br> <li><a href="/ibm/console/webServerPropagateConfig.do">Propagate these saved changes</a> directly to the target Web server machine.<br><li><a href="/ibm/console/webServerPropagateConfig.do?discard=true">Discard these changes</a> and load configuration file from target Web server machine.
webserver.keyfile.propagate.nodirectory=Cannot copy key store file because no target key store directory and file name been defined.  A target key store file and directory value can be defined on the global settings page.
webserver.keyfile.propagate.nokeystore=Cannot manage or copy key store file because no key store has been defined.  To define a key store,  run the new virtual host wizard and select security enabled virtual host.
webserver.keyfile.propagate.success=Keystore files {0}.kdb and {0}.sth in directory {1} have successfully been propagated to target WebServer location {2} and {3}.  The webserver must be restarted for changes to take effect.
webserver.new.step1=Specify the Web server name, type, host name and platform.
webserver.new.step1.nd=Select a node for the Web server and select the Web server type
webserver.new.step2=Select a Web server template
webserver.new.step2.nd=Select a Web server template
webserver.new.step3=Enter the properties for the new Web server
webserver.new.step3.nd=Enter the properties for the new Web server
webserver.new.step4=Confirm new Web server
webserver.new.step4.nd=Confirm new Web server
webserver.no.support={0} Request for Web server {1} is not supported for Web server type {2}.
webserver.nossl.module=LoadModule directive for "ibm_ssl_module" is not found in the IBM HTTP Server configuration file, yet one of the virtual hosts below has security enabled. You need to run the security virtual host wizard or edit the confiuration file and  enable the LoadModule directive for "ibm_ssl_module".
webserver.not.started=Web server {0} is not started.
webserver.object.must.be.selected=You must select at least one Web server to perform this action.
webserver.plugincfg.generated=The Web server plugin configuration was updated successfully for server {0}.
webserver.plugincfg.generation.failed=An error occurred while updating the Web server plugin configuration for server {0}. Check the logs for details.
webserver.plugincfg.propagated=The Web server plugin configuration was propagated successfully for server {0}.
webserver.plugincfg.propagation.failed=An error occurred while propagating the Web server plugin configuration for server {0}. Check the logs for details.
webserver.selectNode.errormsg1=Server name is required.
webserver.selectNode.invalidHostName=The Web server host name {0} is not valid. Only alphanumeric characters are allowed.
webserver.selectNode.invalidSrvName=The Web server name {0} is not valid.
webserver.selectNode.invalidtype=Web server type  {0} is not supported on platform for selected node.
webserver.selectNode.msg1=Select a node that corresponds to the Web server you want to add.
webserver.selectNode.msg3=Select node
webserver.selectNode.msg4=View more information about this step.
webserver.selectNode.msg5=The node that you select on this step will determine the server processes available for the next step.
webserver.selectNode.msg6=Name of the Application server to associate with this Web server entry.
webserver.selectNode.msg7=Select template
webserver.selectNode.serverName=Server name
webserver.selectNode.unauthorized=This node does not permit configuration of a Web server for this userID.
webserver.selectTemplate.msg1=Existing Web server
webserver.selectTemplate.msg2=Using an existing Application server as a template will copy the configuration for the selected server.
webserver.selectTemplate.msg3=Default Web server template
webserver.selectTemplate.msg4=Clear filter value
webserver.selectTemplate.msg5=Show/Hide filter
webserver.selectWebServer.errormsg1=Server name is required.
webserver.selectWebServer.errormsg2=Web server {0} exists within node {1}.
webserver.selectWebServer.errormsg2a=Web server {0} exists on host name {1} within node {2}.
webserver.selectWebServer.errormsg3=Host name is required.
webserver.selectWebServer.invalidtype=Web server type {0} is not supported on platform.
webserver.selectWebServer.msg1=Select the template that corresponds to the server that you want to create.
webserver.selectWebServer.msg6=Logical name for server. Name must be unique within node.
webserver.selectWebServer.serverName=Server name
webserver.selectWebServer.srvmsg1=Specify a Web server name, type, host name and platform.
webserver.specifykeystore.altmsg1=A key store file has already been defined for this Web server.   A certificate can be selected below to run for this virtual host.  If no certificate is selected, the default certificate for the key database will be used.
webserver.specifykeystore.directory=Target key store directory
webserver.specifykeystore.filename=Key store file name
webserver.specifykeystore.msg1=A key store file with a self signed certificate will be created in the WebSphere repository and propagated to target Web server machine upon completion of this wizard.  Web server key store management and propagation to target Web server machine can be done through WebSphere console at a later time.
webserver.specifykeystore.msg2=Specifies the name of the key store file.  This will be the name that represents the key store file in the WebSphere repository.  The physical file will be created in the WebSphere configuration repository under the Web server in which it was created.  The name of that file will be <key store filename>.kdb.
webserver.specifykeystore.msg3=Specifies the directory on the Web server machine for the key store file and key store stash file.
webserver.specifykeystore.msg4=Specifies password for key store file.
webserver.specifykeystore.msg5=Verify  password for key store file.
webserver.specifykeystore.password=Key store password
webserver.specifykeystore.verifypassword=Verify key store password
webserver.specifysslinfo.certificatelabel=Certificate alias
webserver.specifysslinfo.clientauth=Client authentication
webserver.specifysslinfo.msg1=Specify optional security directives
webserver.specifysslinfo.msg2=Specify key store certificate label.  This is used to identify self signed certificate that will be created.  This is also used to specify the certificate the Web server will use to serve secure pages.
webserver.specifysslinfo.msg3=Client authentication
webserver.specifysslinfo.msg4=Additional security directives
webserver.specifysslinfo.textdirectives=Additional Security directives
webserver.specifyvhostinfo.documentroot=Document Root
webserver.specifyvhostinfo.ipaddress=IP Address
webserver.specifyvhostinfo.msg1=Specify virtual host properties
webserver.specifyvhostinfo.msg2=Specifies the full IP address that a client uses to access the Web server.  Use 0.0.0.0 for the default host. To listen on all IP interfaces, use * in this field.  A full host name can also be used but not recommended.
webserver.specifyvhostinfo.msg3=Specifies the port for the Web server to accept incoming requests.  Valid port values are between 0 and 65535.
webserver.specifyvhostinfo.msg4=Server name of virtual host
webserver.specifyvhostinfo.msg5=Document root of virtual host
webserver.specifyvhostinfo.msg6=Additional virtual host directives
webserver.specifyvhostinfo.port=Port
webserver.specifyvhostinfo.servername=Server Name
webserver.specifyvhostinfo.textdirectives=Additional Virtual Host directives
webserver.sslvhost.confirm.msg1=New security enabled virtual host {0} will be created on server {1}.
webserver.sslvhost.confirm.msg2=The modified IBM HTTP Server configuration file will be propagated to Web server machine.
webserver.sslvhost.confirm.msg3=The newly created key store files {0}.kdb and {0}.sth with self signed certificate will be propagated from WebSphere repository to target Web server location {1}.
webserver.sslvhost.confirm.msg4=Repository information must be saved after finishing this wizard if you wish to manage and propagate newly created key store.
webserver.sslvhost.create=Create new security enabled virtual host
webserver.sslvhost.create.description=Create new security enabled virtual host
webserver.sslvhost.createfailure.msg1=Failed to create new security enabled virtual host.  Configuration files have not been updated and key store files have not been created.
webserver.sslvhost.createfailure.noconnection=A problem was encountered transferring file {0} to directory {1}.  Could not make a connection to the node agent or IBM HTTP Server administration server on node {2}.
webserver.sslvhost.createfailure.transfererror=A problem was encountered transferring file {0} to directory {1} on node {2}.  Make sure the directory  and file exists and has correct access permissions for file transfer.
webserver.sslvhost.createsuccess.msg1=New security enabled virtual host has successfully been created.  Restart the Web server for changes to take effect.
webserver.sslvhost.dupvhost=A virtual host with specified IP Address and port already exists for this Web server.
webserver.sslvhost.ipinv=The IP address is not a valid IP address. The IP address cannot contain blanks or special characters.
webserver.sslvhost.ipv4inv2=The IP address is not a valid IP Version 4 IP address, check help for information on IP Version 4 format.
webserver.sslvhost.ipv6inv1=The IP Version 6 IP address for IBM HTTP Server virtual host directive must be contained be in brackets [].
webserver.sslvhost.ipv6inv2=The IP address is not a valid IP Version 6 IP address, check help for information on IP Version 6 format.
webserver.sslvhost.new.step1=Specify key store properties
webserver.sslvhost.new.step2=Specify virtual host properties
webserver.sslvhost.new.step3=Confirm new security enabled virtual host
webserver.sslvhost.password.incorrect=The password does not match the value in the confirm password field.
webserver.type.changed.fromIHS="Web server type has changed from IHS to non IHS, admin authorization and service fields have been reset."
webserver.type.changed.toIHS="Web server type has changed from non-IHS to IHS, fill in IHS administration server fields if you wish to connect to IHS admin server."
webserver.vhost.wizard.displayName=New Web server virtual host
webserver.vhost.wizard.new.description=Use this page to create a new SSL or non SSL virtual host.
webserver.vhosts.must.be.selected=You must select at least one Web server virtual host to perform this action.
webserver.view.logs1=View the Web server logs
webserver.view.logs2=for details.
webserver.wizard.selectvhost.nossl=Name-based or IP-based virtual host
webserver.wizard.selectvhost.nossl.description=Specifies the creation of a name-based or IP-based virtual host.   Name-based virtual hosts allow multiple websites with host names to be associated with one IP address.  IP-based virtual hosts allow multiple websites to be run with different IP address or ports.
webserver.wizard.selectvhost.ssl=Security enabled virtual host
webserver.wizard.selectvhost.ssl.description=Specifies the creation a new virtual host with security enabled. This wizard will gather key store, self signed certificate, and virtual host information.  When complete key store files and a modified configuration file will be propagated to Web server machine and after a restart secure pages can be served through IBM HTTP Server.  After completion of this wizard, key store and certificate management including progagation of key store and stash files can be completed through the console.


WebServer.clusterPluginProps.clusterAddress.description=Cluster address. Requests without session affinity will be routed to the cluster address.
WebServer.clusterPluginProps.clusterAddressName.description=Cluster address.  Name of the cluster address.
WebServer.clusterPluginProps.connectTimeout.description=Specifies the connection timeout settings. If No timeout is selected, the plug-in performs nonblocking connections with the application server. If Set limit is selected, you must specify a value in the seconds field. Specify a value of 0, if you want the plug-in to perform a blocking connection. Specify a value greater than 0, if you want the plug-in to wait the specified number for seconds to perform a successful connection. If a connection does not occur after that time interval, the plug-in marks the server unavailable and sends the request to another application server defined in the cluster.
WebServer.clusterPluginProps.description=Use this page to configure application server cluster properties for a web server plug-in.
WebServer.clusterPluginProps.enableClusterAddress.description=Enable the cluster address for this cluster. Requests without session affinity will be routed to the cluster address.
WebServer.clusterPluginProps.enableHTTP.description=Enable this HTTP transport for the cluster address.
WebServer.clusterPluginProps.enableHTTPS.description=Enable this HTTPS transport for the cluster address.
WebServer.clusterPluginProps.extendedHandshake.description=Specifies whether the plug-in performs handshaking with the application server to ensure that it is running before sending the request to that application server. This attribute should be selected if a proxy firewall is between the plug-in and the application server because it enables the plug-in to redirect client requests if that application server is down.
WebServer.clusterPluginProps.getDWLMTable.description=Specifies whether to allow a newly spawned plug-in process to proactively request a partition table from WebSphere Application Server before it handles any HTTP requests.
WebServer.clusterPluginProps.host.description=Transport host.
WebServer.clusterPluginProps.keyring.description=Keyring filename to be used with an HTTPS transport.
WebServer.clusterPluginProps.maxConnections.description=Specifies the maximum number of pending connections that can be queued for an application server through a web server process at any point in time.
WebServer.clusterPluginProps.port.description=Transport port.
WebServer.clusterPluginProps.serverIOTimeout.description=Select this property to override TCP connection time-outs.
WebServer.clusterPluginProps.serverIOTimeoutRetry.description=Specifies if the plug-in should retry on a read/write timeout. A positive value will indicate the maximum times the plug-in will retry a request that has taken a read/write timeout. A negative value indicates there is no set limit of retries. The plug-in will never retry more times than there are servers. A value of zero indicates the plug-in will not retry the request on a read/write timeout.
WebServer.clusterPluginProps.stashfile.description=Stashfile name to be used with an HTTPS transport.
WebServer.clusterPluginProps.waitForContinue.description=Specifies whether the HTTP 1.1 100 Continue header is sent to an application server before the content of a request is sent to that application server.
WebServer.configFile.description=Use this page to view or modify the contents of the web server configuration file.
WebServer.configFileLink.description=Use this page to view or modify settings for the configuration file.
WebServer.description=Use this page to view a list of the installed web servers.
WebServer.detail.configFile.description=Specifies the relative path to the web server configuration file.
WebServer.detail.description=Use this page to configure a web server that provides HTTP and HTTPS support to application servers.
WebServer.detail.hostname.description=Specifies the host name on which the web server is installed.
WebServer.detail.installPath.description=Specifies the path to where the web server is installed (required for IBM(R) HTTP Server only).
WebServer.detail.instanceName.description=Specifies the instance name of the web server.
WebServer.detail.logFile.description=Specifies the relative path to the web server log file.
WebServer.detail.name.description=Specifies the logical name for the web server.  The name must be unique within the cell.
WebServer.detail.platformOS.description=Specifies the web server platform type.
WebServer.detail.port.description=Specifies the port from which the web server is accessed.
WebServer.detail.protocol.description=Specifies whether to use the HTTPS secure protocol. If you leave this option blank, the default protocol is HTTP, which is not secure.
WebServer.detail.serviceName.description=Specifies the Microsoft(R) Windows(R) operating system service name of the web server.
WebServer.detail.type.description=Specifies the type of web server.
WebServer.logFile.access.description=Specifies the path to the web server access log file.
WebServer.logFile.description=Use this page to view the web server log file(s).
WebServer.logFile.error.description=Specifies the path to the web server error log file.
WebServer.logFileLink.description=Use this page to view or modify settings for the log file.
WebServer.name.description=Specifies the names of the installed web servers.
WebServer.plugin.link.caching.displayName.description=Click to configure caching properties for a web server plug-in.
WebServer.plugin.link.customprops.displayName.description=Click to configure additional custom properties for a web server plug-in.
WebServer.plugin.link.optimization.displayName.description=Click to configure request and response optimization properties for a web server plug-in.
WebServer.plugin.link.servercluster.displayName.description=Click to configure request routing properties for a web server plug-in.
WebServer.pluginCaching.description=Use this page to configure caching properties for a web server plug-in.
WebServer.pluginCaching.enableESI.description=Specifies whether Edge Side Include (ESI) processing is enabled to cache the HTTP responses.
WebServer.pluginCaching.enableInvalidator.description=Specifies whether the plug-in can receive invalidations from the application server.
WebServer.pluginCaching.maxCacheSize.description=Specifies the maximum size of the cache, in 1KB units. The default maximum size of the cache is 1 MB. If the cache is full, the first entry to be evicted from the cache is the entry that is closest to expiring.
WebServer.pluginCluster.cloneSeparator.description=Specifies whether the plug-in uses the plus sign (+) to separate the clone IDs that are used for session affinity. Normally the plug-in uses the colon (:). However, some pervasive devices cannot handle the colon character. If this attribute is used to change the separation character, the application server's configurations must also be changed such that the application server also uses the plus sign to separate clone IDs.
WebServer.pluginCluster.description=Use this page to configure request routing properties for a web server plug-in. These properties apply to all requests the web server routes to application servers.
WebServer.pluginCluster.loadBalancing.description=Specifies the load balancing option that the plug-in is using.
WebServer.pluginCluster.maxRequestSizeLabel.description=Specifies the maximum number of bytes an HTTP request can contain in order for the plug-in to attempt to send it to an application server. If a request is received that is larger than the specified maximum size, the plug-in issues an error message containing an HTTP response code. By default, there is no maximum size limit.
WebServer.pluginCluster.postBufferSize.description=Specifies the maximum size of post data that the web server plug-in expects in a request.
WebServer.pluginCluster.removeHeaders.description=Specifies whether the plug-in adds special headers to a request before it is forwarded to an application server. By default, the plug-in will remove any special headers from incoming requests before adding these headers. Setting this attribute to false introduces a potential security exposure because special headers are not removed from incoming requests.
WebServer.pluginCluster.retryInterval.description=Specifies how long, in seconds, the plug-in should wait before checking to see if changes have been made to the configuration file. 
WebServer.pluginOptimization.ASNagle.description=Specifies whether the user wants to disable the Nagle algorithm for the connection between the plug-in and the application server.
WebServer.pluginOptimization.IISNagle.description=Specifies whether the Nagle algorithm for the Microsoft(R) Internet Information Services (IIS) Web Server is enabled. When this field is not selected, the Nagle algorithm is disabled.
WebServer.pluginOptimization.IISPriority.description=Specifies the priority the Microsoft(R) Internet Information Services (IIS) Web Server uses when loading the plug-in.
WebServer.pluginOptimization.acceptContent.description=Specifies whether clients can include content in POST, PUT, GET, and HEAD requests when a Content-Length or Transfer-encoding header is contained in the request header. It can be set to true if content is to be expected and read for all requests. By default, content is to be expected and read for POST and PUT requests only.
WebServer.pluginOptimization.chunkResponse.description=Specifies whether the plug-in chunks responses to the client if the header Transfer-Encoding : Chunked is present in the response. This attribute only applies to the following web servers:  Internet Information Services (IIS) web servers, Java(TM) System Web Servers, and Domino(R) Web Servers. The IBM(R) HTTP Server for distributed platforms automatically handles the chunking of the response to the client.
WebServer.pluginOptimization.description=Use this page to configure request and response optimization properties for a web server plug-in.
WebServer.pluginOptimization.logicalPort.description=Specifies that the plug-in is logically using the port number from the host header.
WebServer.pluginOptimization.maxChunkSize.description=Specifies the maximum chunk size, in KB, that the plug-in uses when reading the body portion of the HTTP response.
WebServer.pluginOptimization.physicalPort.description=Specifies that virtual host matching is performed physically using the port specified in the request.
WebServer.pluginOptimization.portPreference.description=Specifies the port number the application server uses in building URIs for a sendRedirect call.  The port number can be the port number from the host header of the HTTP request, or the port number on which the web server received the request.
WebServer.pluginOptimization.vhMatchingLabel.description=Specifies how virtual host matching is performed. Matching can be performed physically using the port specified in the request, or the plug-in can logically use the port number from the host header.
WebServer.pluginProperties.autoGen.description=Specifies whether the web server plug-in configuration file automatically regenerates whenever related settings change. The web server plug-in configuration service must be enabled for this setting to take effect.
WebServer.pluginProperties.autoProp.description=Specifies whether the web server plug-in configuration file is automatically propagated to this web server whenever the plug-in regenerates. The web server plug-in configuration service must be enabled for this setting to take effect. 
WebServer.pluginProperties.configFileName.description=Specifies the name of the plug-in configuration file.
WebServer.pluginProperties.description=Use this page to configure a web server plug-in. The plug-in passes HTTP requests from a web server to WebSphere(R) application servers.
WebServer.pluginProperties.file.description=Specifies the content of the file.
WebServer.pluginProperties.ignoreDNS.description=Specifies whether DNS errors are ignored during the web server startup process.
WebServer.pluginProperties.installPath.description=Specifies the fully qualified path for the location of the plug-in configuration file.
WebServer.pluginProperties.keyRingFileName.description=Specifies the name of the key store file on the web server that the web server plug-in uses for HTTPS requests.
WebServer.pluginProperties.logFileName.description=Specifies the name of the log file on the web server to which plug-in messages are written.
WebServer.pluginProperties.logLevel.description=Specifies the level of messages that are sent to the log file. If trace is selected, all of the steps in the request process are logged in detail. If stats is selected, the server that is chosen for each request and other load balancing information relating to request handling are logged. If warn is selected, all of the warning and error messages that result from abnormal request processing are logged. If error is selected, only error messages that result from abnormal request processing are logged. 
WebServer.pluginProperties.pluginLogging.description=Specifies the logging settings for a web server plug-in.
WebServer.pluginProperties.refreshInterval.description=Specifies how frequently, in seconds, the plug-in configuration reloads.
WebServer.pluginProperties.repository.files.description=Click to display details about the web server plug-in files that are stored inside the repository.
WebServer.pluginProperties.webserver.configFileName.description=Specifies the fully qualified path of the web server copy of the web server plug-in configuration file. This path is the name of the file and its location on the machine where the web server is running.
WebServer.pluginProperties.webserver.files.description=Click to display details about the web server plug-in files that are stored on the web server host system.
WebServer.pluginProperties.webserver.keyRingFileName.description=Specifies the fully qualified path of the web server copy of the database file that contains your security key rings. This path is the name of the file and its location on the machine where the web server is running.
WebServer.pluginService.description=Use this page to automatically generate the plug-in configuration file whenever the web server environment changes.
WebServer.pluginService.enable.description=Specifies whether the web server plug-in configuration service is enabled.
WebServer.property.description=Specifies an arbitrary name and value pair, where the name is a property key and the value is a string value to use for setting the internal system configuration properties.
WebServer.property.description.description=Specifies information about the name and value pair.
WebServer.property.link.description=Custom properties description.
WebServer.property.name.description=Specifies the name, or key, for the property.
WebServer.property.value.description=Specifies the value for the paired name or key.
WebServer.remote.adminhostname.description=Specifies the host name of the IBM(R) HTTP Server administration server .
WebServer.remote.description=Use this page to configure the IBM(R) HTTP Server administration server for a web server. These properties are required for a web server that is not installed on the same machine as the WebSphere(R) application server.
WebServer.remote.password.description=Specifies the authentication password for the administration server.
WebServer.remote.port.description=Specifies the administration server port.
WebServer.remote.protocol.description=Specifies whether to use the HTTPS secure protocol. If you leave this option blank, the default protocol is HTTP, which is not secure.
WebServer.remote.userid.description=Specifies the authentication user ID for the administration server.
WebServer.remoteManagement.description=Use this page to configure the properties of a remote web server.
WebServer.runtime.cellName.description=Specifies the name of the cell on which this web server runs.
WebServer.runtime.nodeName.description=Specifies the name of the node on which this web server runs.
WebServer.runtime.pid.description=Specifies the native operating system process ID for this web server.
WebServer.runtime.state.description=Specifies the runtime execution state for this web server.
WebServer.serverPluginProps.connectTimeout.description=Specifies the connection timeout settings. If No timeout is selected, the plug-in performs nonblocking connections with the application server. If Set limit is selected, you must specify a value in the seconds field. Specify a value of 0, if you want the plug-in to perform a blocking connection. Specify a value greater than 0, if you want the plug-in to wait the specified number for seconds to perform a successful connection. If a connection does not occur after that time interval, the plug-in marks the server unavailable and sends the request to another application server defined in the cluster.
WebServer.serverPluginProps.description=Use this page to configure application server properties for a web server plug-in.
WebServer.serverPluginProps.extendedHandshake.description=Specifies whether the plug-in performs handshaking with the application server to ensure that it is running before sending the request to that application server. This attribute should be selected if a proxy firewall is between the plug-in and the application server because it enables the plug-in to redirect client requests if that application server is down.
WebServer.serverPluginProps.maxConnections.description=Specifies the maximum number of pending connections that can be queued for an application server through a web server process at any point in time.
WebServer.serverPluginProps.serverIOTimeout.description=Select this property to override TCP connection time-outs.
WebServer.serverPluginProps.serverRole.description=Specifies the role of the web server.
WebServer.serverPluginProps.waitForContinue.description=Specifies whether the HTTP 1.1 100 Continue header is sent to an application server before the content of a request is sent to that application server.
distmanagement.webserver.create.new.description=Use this page to create a new web server.
