JMeter supports dashboard report generation to get graphs and
statistics from a test plan.
This chapter describes how to configure and use the generator.
The dashboard generator is a modular extension of JMeter.
Its default behavior is to read and process samples from
CSV files to generate HTML files containing graph views.
It can generate the report at end of a load test or on demand.
This report provides the following metrics:
APDEX (Application Performance Index) table that computes for every transaction the APDEX based on configurable values for tolerated and satisfied thresholds
A request summary graph showing the Success and failed requests (Transaction Controller Sample Results are not taken into account) percentage:
A Statistics table providing in one table a summary of all metrics per transaction including 3 configurable percentiles :
An error table providing a summary of all errors and their proportion in the total requests :
A Top 5 Errors by Sampler table providing for every Sampler (excluding Transaction Controller by default) the top 5 Errors :
Zoomable chart where you can check/uncheck every transaction to show/hide it for:
Response times Over Time (Includes Transaction Controller Sample Results) :
Response times Percentiles Over Time (successful responses only) :
Active Threads Over Time :
Bytes throughput Over Time (Ignores Transaction Controller Sample Results) :
Latencies Over Time (Includes Transaction Controller Sample Results) :
Connect Time Over Time (Includes Transaction Controller Sample Results) :
Hits per second (Ignores Transaction Controller Sample Results):
Response codes per second (Ignores Transaction Controller Sample Results):
Transactions per second (Includes Transaction Controller Sample Results):
Response Time vs Request per second (Ignores Transaction Controller Sample Results):
Latency vs Request per second (Ignores Transaction Controller Sample Results):
Response time Overview (Excludes Transaction Controller Sample Results) :
Response times percentiles (Includes Transaction Controller Sample Results):
Times vs Threads (Includes Transaction Controller Sample Results):
In distributed mode, this graph shows a horizontal axis the number of threads for 1 server. It's a current limitation
Response Time Distribution (Includes Transaction Controller Sample Results):
Dashboard generation uses JMeter properties to customize the
report. Some properties are used for general settings and others are
used for a particular graph configuration or exporter configuration.
All report generator properties can be found in file reportgenerator.properties.
To customize these properties, you should copy them in user.properties file and modify them.
To enable the generator to operate, the CSV file generated by JMeter
must include certain required data which are correct by default in the last live version of JMeter.
If you modified those settings, check that your JMeter configuration follows these settings (these are the defaults):
jmeter.save.saveservice.bytes = true
# Only available with HttpClient4
#jmeter.save.saveservice.sent_bytes=true
jmeter.save.saveservice.label = true
jmeter.save.saveservice.latency = true
jmeter.save.saveservice.response_code = true
jmeter.save.saveservice.response_message = true
jmeter.save.saveservice.successful = true
jmeter.save.saveservice.thread_counts = true
jmeter.save.saveservice.thread_name = true
jmeter.save.saveservice.time = true
jmeter.save.saveservice.connect_time = true
jmeter.save.saveservice.assertion_results_failure_message = true
# the timestamp format must include the time and should include the date.
# For example the default, which is milliseconds since the epoch:
jmeter.save.saveservice.timestamp_format = ms
# Or the following would also be suitable
# jmeter.save.saveservice.timestamp_format = yyyy/MM/dd HH:mm:ss
If you use Transaction Controllers, to ensure most accurate results:
uncheck the box (this is the default configuration):
Generate parent sample
If Transaction Controller is used as a Container to represent a request for an HTML Page that will trigger Ajax calls and you
only want in your report the Transaction Controller, then Right click on the node and Apply Naming Policy
Title used in the generated report.
Default: "Apache JMeter Dashboard"
No
date_format
Default date format from
SimpleDateFormat Java API with Locale.ENGLISH.
Default Date format is yyyyMMddHHmmss
Useful when you would like to generate a report after the load test, and the results file contains timestamp in
another time zone. In this case the date format must include the time zone (zzz).
If jmeter.save.saveservice.timestamp_format does not contain year then use 1970 as year
Example: dd/MM/yyyy HH:mm:ss zzz
No
start_date
Start date of the range of data to use for report.
Date format is defined by date_format property.
Default: not filled which means data range will be used from the beginning
No
end_date
End date of the range of data to use for report.
Date format is defined by date_format property.
Default: not filled which means data range will be used until the end
No
overall_granularity
Granularity of over time graphs. Data is aggregated to have 1 minute ticks.
Granularity must be higher than 1 second (1000) otherwise throughput graphs will be incorrect
Default: "60000" (1 minute)
No
apdex_satisfied_threshold
Sets the satisfaction threshold for the
APDEX
calculation (in ms).
Default: 500
No
apdex_tolerated_threshold
Sets the tolerance threshold for the APDEX calculation
(in ms).
Default: 1500
No
jmeter.reportgenerator.apdex_per_transaction
Sets satisfaction and tolerance threshold to specific samples.
Use sample names or regular expression.
Format is sample_name:satisfaction|tolerance[;]
Values are in milliseconds.
Notice the colon between sample name and values, the pipe between thresholds and the
semicolon at the end to separate different samples. Don't forget to escape after
semicolon to span multiple lines.
Sets the filter of samples to keep for generating
graphs and statistics. An empty value deactivates the
filtering.
Format: Regular expression.
Default: ""
No
temp_dir
Sets the temporary directory used by the generation
process if it needs file I/O
operations.
Default: temp
No
statistic_window
Sets the size of the sliding window used by percentile
evaluation. Caution: higher value provides a
better accuracy but needs more memory.
Default: 20000
No
Percentiles used by Summary table and Percentile graphs can be adjusted to different values by using the 3 properties:
aggregate_rpt_pct1 : Defaults to 90
aggregate_rpt_pct2 : Defaults to 95
aggregate_rpt_pct3 : Defaults to 99
Relative paths are built from the JMeter working directory
(default: bin).
You can define some overall properties which are used by the
generator configuration. These properties are freely named
but you should use the prefix
The fully qualified class name of the graph
The class of the graph must extend
org.apache.jmeter.report.processor.graph.AbstractGraphConsumer.
See
Default graph section
for more details.
Yes
exclude_controllers
Defines
whether the graph discards controller samples.
Default: false
The name of the property will be mapped using camel case
transformation and the matching method of the class will be
called with the property value as argument.
The fully qualified class name of the exporter
The class of the exporter must implement
org.apache.jmeter.report.dashboard.DataExporter
.
Yes
filters_only_sample_series
Defines whether series_filter (see below)
apply only on sample series.
Default: true
No
series_filter
Sets the filter
of series. An empty value deactivates the filtering.
If not empty, regex should end with (-success|-failure)?$
Format: regular expression.
Default: ""
No
show_controllers_only
Defines whether only controller series are shown.
Default: false
Unlike the filtering in the section
General properties
which discards data before calculations, here the
filtering is performed after the calculations and serves
to simplify the final report.
The property series_filter
allows to filter which series of a graph (resp. rows of
a summary table) using regular expression that matches
the name of the series (resp. of the row).
However, even if the name of the
series (resp. row) matches the filter, the setting
of the other filtering properties can lead to its
discarding. Conversely if there is no matching, the
other properties can allow to keep it.
The following tables show how the setting of filtering
properties works.
Incorrect filter configuration can lead to generate empty
graphs/summary tables:
If you set the property
show_controllers_only
and the graph is configured to exclude
controllers.
If the property
series_filter
matches none series.
You can copy the following configuration to your user.properties
file in order to test the report generator.
# Configure this property to change the report title
#jmeter.reportgenerator.report_title=Apache JMeter Dashboard
# Change this parameter if you want to change the granularity of over time graphs.
# Granularity must be higher than 1000 (1second) otherwise Throughput graphs will be incorrect
# see Bug 60149
#jmeter.reportgenerator.overall_granularity=60000
Change this parameter if you want to change the granularity of Response time distribution
# Set to 100 ms by default
#jmeter.reportgenerator.graph.responseTimeDistribution.property.set_granularity=100
# Change this parameter if you want to override the APDEX satisfaction threshold.
jmeter.reportgenerator.apdex_satisfied_threshold=1500
# Change this parameter if you want to override the APDEX tolerance threshold.
jmeter.reportgenerator.apdex_tolerated_threshold=3000
# Sets the destination directory for generated html pages, it is better to change it for every generation
# This will override the value set through -o command line option
# jmeter.reportgenerator.exporter.html.property.output_dir=/tmp/test-report
# Indicates which graph series are filtered (regular expression)
# In the below example we filter on Search and Order samples
# Note that the end of the pattern should always include (-success|-failure)?$
# Transactions per second suffixes Transactions with "-success" or "-failure" depending
# on the result
#jmeter.reportgenerator.exporter.html.series_filter=^(Search|Order)(-success|-failure)?$
# Indicates whether series filter apply only on sample series
jmeter.reportgenerator.exporter.html.filters_only_sample_series=true
Adapt the parameter
output_dir
to your environment.
This configuration allows to generate a report where:
Over time graphs have a time granularity equal to 1 minute.
The satisfaction threshold for ADPEX calculation is 1 second and half.
The tolerance threshold for ADPEX calculation is 3 seconds.
The HTML files are generated in the directory /tmp/test-report.
Only series which the name begins with "s0" or "s1" are shown.
The previous filter only applies to graphs (resp. summary tables) where the series (resp. rows) match samples
You can graph any sample_variable in CSV over time, you can customize your graphs
by settings their properties in the user.properties file.
They must use the id prefix custom_:
Sets the displayed message when the cursor is on a point of the graph.
Yes
set_Sample_Variable_Name
Name of the column you want to graph in the csv.
Yes
Here is an example of a custom graph configuration that graphs the variable ts-hit:
jmeter.reportgenerator.graph.custom_testGraph.classname=org.apache.jmeter.report.processor.graph.impl.CustomGraphConsumer
jmeter.reportgenerator.graph.custom_testGraph.title=Chunk Hit
jmeter.reportgenerator.graph.custom_testGraph.property.set_Y_Axis=Number of Hits
jmeter.reportgenerator.graph.custom_testGraph.set_X_Axis=Over Time
jmeter.reportgenerator.graph.custom_testGraph.property.set_granularity=60000
jmeter.reportgenerator.graph.custom_testGraph.property.set_Sample_Variable_Name=ts-hit
jmeter.reportgenerator.graph.custom_testGraph.property.set_Content_Message=Number of Hits :
